Paint markers

POSCA PC-7M -Paint markers

9,60 €

POSCA PC-7M paint markers feature a 4.5 – 5.5 mm wide round tip. Suitable for various surfaces such as paper, cardboard, clay, stone, ceramics, wood, metal, fabric, plastic…

  • Highly pigmented and lightfast colors
  • Water-soluble; color can be applied and thinned with a wet brush as long as the color is wet.
  • Quick drying; once dry, it is waterproof.
  • Can be used in layers; new layers completely cover lower layers.
  • Colors can be mixed together. The tip can be rinsed under a water tap without worry.
  • Even a dried tip can be removed and soaked in a glass of water overnight.
  • The tips of 3M and 5M markers are reversible.

Arteljeen Avaintuote, this product is not eligible for any other discounts (campaign discounts, professional profiles).

Ilmainen toimitus yli 150€ tilauksiin!

  • Check Mark Toimitus 1-3 päivässä
  • Check Mark Ilmainen nouto myymälästä
  • Check Mark Kattavat maksutavat
SKU: N/A Categories: , , , , , ,

Posca marker setup instructions:

  1.  Shake the pen vigorously (do not remove the cap yet).
  2.  The internal ball mixes the color when shaken.
  3.  Pump the tip of the pen onto scrap paper until the tip is completely filled with color. Always test the flow on scrap paper first. You can also wipe the tip with a cloth during use. If the color flow is sluggish, put the cap back on to avoid splashes, shake the pen again, and pump the tip once more. Pump again, and you can continue.

Permanence of colors on different surfaces:

  • Paper, cardboard, and primed canvas, and other porous surfaces absorb the color so that it remains permanent.
  • To achieve permanent color on stone, plastic, metal, and wood, apply varnish on top.
  • Color on fabric is more permanent when ironed from the reverse side. After more than 20 washes, the color may start to fade, allowing you to redraw designs with Posca markers.
  • For ceramics, you can achieve permanent color by baking at 220 degrees Celsius for 45 minutes, then applying varnish.
  • For porcelain, you can achieve permanent color by baking at 160 degrees Celsius for 45 minutes, then applying varnish.
  • For glass, you can achieve hand-washable color by baking at 160 degrees Celsius for 45 minutes, then applying varnish.

 

Related products